July/August GB's? [Archive] - 300zxClub.com (Nissan 300ZX Forums)

biabia

06-05-2008, 09:01 AM

I realize this is probably soon but it would be good to setup for those having an outlook on their purchases, whether now or later. I am already getting the 300 degree fuel rail and 740cc injectors, so i was just curious what people want to see.

What are you looking to buy in the next month or two if you don't like what you see (or if you just want to build the Z). This is to give mods/3ZC an idea on what the general population is looking to buy.

I want:

Snow Water Injection kit
Unorthodox racing UDP set
Oil cooler upgrade
Radiator upgrade

seedweed23

06-05-2008, 09:39 AM

definitely radiator upgrade.
oil cooler upgrade
water injection
turbo kit
pistons/rods

as you can see..i'm trying to get my build started..lol

Jay Shev

06-05-2008, 10:27 AM

jschrauwen

06-05-2008, 11:49 AM

GT675s would be nice again. Anyone up for a group buy on a Stage IV LB from IPP?? lol. I have the entire fuel system already, as well as the exhaust, and intake, now I just need the stuff in between :)
Stage IV Long Block Jay? That's some serious build you have planned.

myblue92maxima

06-05-2008, 11:57 AM

floor mats so i can finish my interior.

daxnizmo

06-05-2008, 12:03 PM

FPR
Fuel dampner
Fuel filter
Fuel pump
$50 gas card, ;)

Spyder Z 15

06-05-2008, 12:09 PM

Honestly it's up to what the site sponsors offer.

Moved to 3ZC store section

movado1

06-05-2008, 01:19 PM

I would be down for the IPP stage IV that might be hard to do on a gb, core charge, hope they could do it I am going to have to get it in the next year anyway to complement all the goodies I have picked up on the gb's

Zya8187

06-05-2008, 01:24 PM

floor mats so i can finish my interior.
check the store

Jay Shev

06-05-2008, 01:37 PM

Stage IV Long Block Jay? That's some serious build you have planned.

hehehehehe :) I wont go into detail too much, but it will be fun :)

tya

06-05-2008, 04:03 PM

GT675s would be nice again. Anyone up for a group buy on a Stage IV LB from IPP?? lol. I have the entire fuel system already, as well as the exhaust, and intake, now I just need the stuff in between :)

lol itd be great, but kyles pretty much a one man show with assembling those engines. You tryin to back him up for the next 2 years? :)

sadairk2

06-05-2008, 04:52 PM

I already have those upgrades except for WI. I'm thinking more like a GB on head work. Or since most swaps need a new oil pan, do that. I really just need to pull my engine and install the shit I already have. Too bad you can't GB an install session. haha.

EckoInLasVegas

06-05-2008, 05:47 PM

BBK damnit

DjTalya

06-05-2008, 05:48 PM

can we get some nos or fmic sprayers?? OHhhh and some kamanari side skirts! and door fillers!!!! plz!!!

ARA300ZX

06-05-2008, 07:55 PM

stillen sway bars, Rotora BBK, 120k kit

WAGGZ

06-05-2008, 08:33 PM

Blazt

all I can think of right now.

91300zxttkid

06-05-2008, 08:35 PM

Meth Kit *****
-George

TnkrsToyCo

06-06-2008, 01:06 AM

Have any of you guys even looked at what is listed for the June buys, there are 3 items listed. The 300 degree rails are listed with 3 different options on the injecters.

deebz

06-06-2008, 01:21 AM

Have any of you guys even looked at what is listed for the June buys, there are 3 items listed. The 300 degree rails are listed with 3 different options on the injecters.
lol... along with myblue92maxima wanting floor mats for next months options haha

pbr87

06-06-2008, 12:05 PM

I'm really hoping for radiator & oil cooler.

SeanK

06-06-2008, 12:32 PM

Practical want: Silicone boost hoses.

Not practical want: SZ 3" Expansion DP's (4 and 5 bolt)

pbr87

06-06-2008, 12:51 PM

Practical want: Silicone boost hoses.

Trust me, spend the extra change on a set of hardpipes. It's money well-spent.

pakiplaya07

06-07-2008, 02:23 PM

1 piece driveshaft.

jschrauwen

06-12-2008, 10:24 AM

Do the suggestions/nominations for GB items have to be parts already on Z1's inventory?

If not, I wouldn't mind seeing something a little different like these;

Gauge Holders

Dash gauge Holder
http://www.photodump.org/stored20/PICT3541.JPG

And the Glovebox Gauge Holder
http://i17.ebayimg.com/03/i/000/ef/d6/aae8_1.JPG http://i13.ebayimg.com/05/i/000/ef/d6/aabb_1.JPG http://i2.ebayimg.com/04/i/000/ef/d6/ab0d_1.JPG

In my case I would like to have both. Secondary gauges in the glovebox along with my turbo timer and Apexi NEO SAFC. The dash gauge holder would probably house a combination of Oil Temp, Water temp, Oil Pressure, or WB.

SeanK

06-12-2008, 01:17 PM

Trust me, spend the extra change on a set of hardpipes. It's money well-spent.

Had them and didn't like them. Too blingy and didn't like 4 clamps per hardpipe. :/ Rolling the stockers with T-bolts currently.

Parajeff71

06-12-2008, 05:42 PM

Wiseco piston/Eagle rod set, and, AMS manifolds again. I'm retard and missed the last one. :cuss:

92silverz

06-27-2008, 05:02 AM

wat about the bear 2 piece stock size front rotors. 5 lbs lighter on each side, chee hee.

DjTalya

06-27-2008, 07:11 PM

brakes please with power comes responsibility. You need to stop! SAVE YOUR LIFE< YOURS CARS LIFE, and OTHERS! its show and performance mod too! ANY KIND OF BRAKES! BBK, or even the rotors!

92silverz

06-27-2008, 08:20 PM

brakes please with power comes responsibility. You need to stop! SAVE YOUR LIFE< YOURS CARS LIFE, and OTHERS! its show and performance mod too! ANY KIND OF BRAKES! BBK, or even the rotors!

bears

EckoInLasVegas

06-28-2008, 12:29 AM

no...rotoras BBK again

06-28-2008, 01:30 AM

Meth kit would be kick ass!!!

92silverz

06-28-2008, 05:07 PM

no...rotoras BBK again

yeah but the stock size two piece would be good because its a stock size and its two piece. light weight plus you can go back to stock wheels when you need to. plus, i'm pretty sure its gonna be much cheaper and easier for a lot of us to afford compare to that BBK.

EDIT unless the BBK is stock size too

91300zxttkid

06-29-2008, 11:52 PM

Snow Performance meth injection Kit with the upgraded dual nozzel kit, and Safe injection!!
-George

pbr87

06-30-2008, 04:05 AM

brakes please with power comes responsibility. You need to stop! SAVE YOUR LIFE< YOURS CARS LIFE, and OTHERS! its show and performance mod too! ANY KIND OF BRAKES! BBK, or even the rotors!

:noob:

All brakes do is slow you down! Why would you ever want beter brakes!?!?!?! :rofl: :rofl: :rofl:

srsly though...I'm game for another AMS manifold GB, or another clutch/flywheel GB.

92silverz

06-30-2008, 06:08 AM

:noob:

All brakes do is slow you down! Why would you ever want beter brakes!?!?!?! :rofl: :rofl: :rofl:

srsly though...I'm game for another AMS manifold GB, or another clutch/flywheel GB.

i guess better brakes are for people who like to do twistie, or track their cars.

silvermagma

07-01-2008, 05:53 PM

I'd LOVEEE a meth kit!
I want one really bad, especially with the Las Vegas heat I have to deal with...

Especially one like 91300zxttkid mentioned =]

OkitaSoshi

07-01-2008, 07:00 PM

i guess better brakes are for people who like to do twistie, or track their cars.

or people that have experienced the fury of being behind somebody with broken taillights when they slam the taillights, and then you can't stop in time.

I LOVE the idea of a BBK and Meth kit...lol Meth kit

300zdett

07-02-2008, 03:50 PM

Dw Injectors!!!

Jason300zxTT

07-02-2008, 03:53 PM

1 Piece Driveshaft.

X2

coolcesitar

07-03-2008, 06:45 PM

I would buy the water inj. kit .. also. Z1 sells one!

traydogg6969

07-04-2008, 03:13 PM

manafolds since im gettin hks 2530's

traydogg6969

07-04-2008, 03:14 PM

Dw Injectors!!!

would love these also with the adapter kit

chaoZ

07-04-2008, 03:53 PM

manafolds since im gettin hks 2530's

manis were like a month ago ya missed them.

id like to see a meth kit. or maybe a roll cage even though i couldnt see it winning

ARA300ZX

07-04-2008, 11:56 PM

i hear Sway bars are the best mod for the buck. if stillen sway bars arent in the next GB poll, im just gonna go ahead and by them.

TuftsAuto

07-05-2008, 09:51 AM

i hear Sway bars are the best mod for the buck. if stillen sway bars arent in the next GB poll, im just gonna go ahead and by them.

Yes. Sway bars are great. I have the stillen adjustables which make it easy to make quick minor suspension changes. I was oversteering too much at the last autox so I was able to just change the sway bar setting slightly to get rid of the oversteer. I highly recommend them even if the rest of your suspension is stock.

z32hp*700*

07-05-2008, 04:55 PM

SZ 5 bolt 3''Down Pipes
SZ Dual Round Tip Stainless Steel 3" Cat Back
Mike Smith manifold
z1's oil cooler

deebz

07-05-2008, 07:54 PM

A little off topic, but I was wondering if the ebrake boot and shift boot will be available with the shift knob, as per what the poll said... or if it will stay only the shift knob itself in the GB?

TnkrsToyCo

07-05-2008, 09:39 PM

SEE POST HERE:
http://www.300zxclub.com/showpost.php?p=1437134&postcount=19

deebz

07-06-2008, 03:37 AM

ahhh my bad, didn't see that post.. thanks!

92silverz

07-06-2008, 06:50 AM

so anybody still want to vote on the two piece stock size front rotor???? please vote this in for the august GB, please

z32turboMO

07-06-2008, 10:36 PM

i wouldnt mind seeing anything off of megaz.net's website.

or maybe some upper a-arms

or the hose techniques kit would be good.

just my .02