VOTE for the August 2008 GROUP BUYS you want to see in the 3ZC STORE!

[N20Z]

VOTE for the August 2008 GROUP BUYS you want to see in the 3ZC STORE!

There will be two group buys next month! So the two products with the most votes will be on sale in the 3ZC store. Please vote on a product only if you are seriously interested in purchasing at a great price.

The 3ZC store is committed to bringing our members incredible deals on the quality Z products they want. Polls are held here to determine what products members want group buys on. New group buys will start around the beginning of each month and usually run to the end of the month. When products are taken out of the “Group Buy” box on the front page of the 3ZC Store they will no longer be available at the special group buy price. This will usually happen around the end of the month, but some products may be removed earlier if our suppliers sell out.

Only members of 300ZXCLUB.COM are eligible to participate in the group buys in the 3ZC Store. Special group buy prices are only available in the 3ZC Store through online ordering. Products on the 3ZC Store are not available for order by phone. The 3ZC Store offers support by email only at store@3zc.com .

Please do not contact our distributors or the product manufactures regarding product pricing, orders, or status of orders on the 3zc.com store. Please send all product and order inquiries to store@3zc.com . The special prices and group buys listed here are only available through the 3ZC Store and not directly through our site sponsors or the product manufacturers.

Unless otherwise stated, group buy orders will be shipped from our distributors within (10) days after the group buy ends. Many of the products may ship sooner, even before the group buy ends. After completing an order, customers will receive an e-mail confirmation and a tracking # will be added to the order comments. However the tracking # will not become active until the product actually ships. Customers will receive another e-mail when the order ships.

Members can place orders on the 3ZC Store with confidence. We only deal with proven vendors and do our research before including products in the store. We feature products that suppliers have in stock or are readily available. In the event that there is a back-order or delay in shipping an item, you have the option of a full refund immediately. 300ZXCLUB.com stands behind your orders and guarantees your satisfaction!

[ARA300ZX]

grr, no sway bars =(

[AntiRiceZ]

Brake lines would be nice.

[jobo526]

BBK say what?! hell yes, lets get on this people, now!

[DjTalya]

Hell Ya Bbk! What!

[ARA300ZX]

bbk got my vote once again

[biabia]

Isn't the point of GB's to save money? How are we going to save money on a brake master cylinder brace or EGR elimination kit?

+1 for BBK

[nismo300zr2]

i went with BBK last month and people wanted red stitched shift knobs instead.

GS hugeangous IC's would be nice. -.-

since they arent there i'd settle for a brake brace that i dont have yet.

[ARA300ZX]

Isn't the point of GB's to save money? How are we going to save money on a brake master cylinder brace or EGR elimination kit?

+1 for BBK

ive mentioned this several times in the past, if its under $100, it shouldnt even be on the poll IMO, thank God those darn floor mats won

[92silverz]

grrrr, where is the stock size two piece light weight front rotor????? i want those, maybe next month

[omegaboost]

hmm bbk are too much, oil cooler I might, my Z is RHD so no MBC, rad hose sounds great but need e-fan and bigger rad first, not doing a build up right now so no ARP hardware, already have SS lines, already have Z1 dp, not doing a build up once again so no pistons needed (BTW wiseco vs CP pistons, which ones are better?), voted for that rad since I'd probably need one and already have egr kit.... ya i didnt need to make my life story i know lol...

[omega7]

Brake Master Cylinder Brace to compensate the BBK.

[z32turboMO]

lower radiator pipe, gonna need one soon for the winter "renewal" hose extravaganza!!!

[pbr87]

I'm down for a radiator upgrade. I'm gonna be ordering it soon either way...but I could always use a little discount ;)

[Zya8187]

I'm voting BBK so the people that come on here and complain it never wins. can't say i didn't try. Also there is nothing I'm just dying to have on the list either so if you want BBK I'm helping you out.

[Twindragon]

I'm voting BBK so the people that come on here and complain it never wins. can't say i didn't try. Also there is nothing I'm just dying to have on the list either so if you want BBK I'm helping you out.

LOL people want it but aren't willing to shell out the 4k it's going to cost...

[omega7]

LOL people want it but aren't willing to shell out the 4k it's going to cost...

+1

Yeah, I paid less than that for my Z...

[biabia]

It shouldn't cost near that much. I foresee the BBK going for under 3k

[TuftsAuto]

Vote stainless steel brake lines. Those should really help with pedal feel for us autox and trackers.

[90pearlz]

I'm gonna go with the 58mm throttle bodies. Anyone else?

[Pearl_TTZ]

Would it be possible to get a group buy on the:

13" Baer 2-Piece rotors and adapters (with all the hardware of course).

I am in desperate need to replace brakes on ym car, so might as well upgrade. Before the rainy season starts in the fall, I hope to have my brake setup completed.

[Biz]

So what do I do if either already have or cannot physically install available parts.

[biabia]

Would it be possible to get a group buy on the:

13" Baer 2-Piece rotors and adapters (with all the hardware of course).

I am in desperate need to replace brakes on ym car, so might as well upgrade. Before the rainy season starts in the fall, I hope to have my brake setup completed.

2-3 months late on this one... :(

[Pearl_TTZ]

2-3 months late on this one... :(

it was on group buy for 1-pc rotors (which are heavier than Rosie O'Donnel). I want the 2-piece rotors. thanks.

[biabia]

There was an option to choose the 2-piece rotors on that last 13'' Z1 BBK kit... so...

[92silverz]

^ooooo, owned. j/j

[Pearl_TTZ]

There was an option to choose the 2-piece rotors on that last 13'' Z1 BBK kit... so...

Ok... do you want a cookie with some frosting on top of it now?!?!?

The key word is "WAS", as in past tense, as in gone and not available anymore...

Now, this thread is asking about GBs for the month of August, and since it is July right now, that means that AUgust is in the future, as in WILL HAPPEN later on...

My point is... if you do not have any suggestions to make regarding FUTURE group buys, please STFU. Thank you.

[biabia]

Well, I would love to have 2 piece rotors again, but that'll be a year from 2 months ago, so good luck with that one.

How about some gauges for a group buy? Anyone?

[Pearl_TTZ]

Well, I would love to have 2 piece rotors again, but that'll be a year from 2 months ago, so good luck with that one.

How about some gauges for a group buy? Anyone?

go with STri gauges... cannot go wrong...

http://img154.imageshack.us/img154/9443/picture001jl3.jpg

http://img154.imageshack.us/img154/347/picture002bl0.jpg

[92silverz]

go with STri gauges... cannot go wrong...

http://img154.imageshack.us/img154/9443/picture001jl3.jpg

http://img154.imageshack.us/img154/347/picture002bl0.jpg


must get some boost gauge for my NA, lol.

[LJ]

If the brakes aren't going to come out being less than the wilwood kit from AZ Z car, I don't see the point in it. Besides all any street Z needs is the front brakes anyway, race pads on the OEM rears are fine for 99.9% of the track days anyone here is going to go to. There is really no reason to do a front/rear kit. I'd like to hold off buying the wilwoods if a group buy is going to bring a better deal, but it isn't going to happen for a front/rear set, which makes it pointless.

[Pearl_TTZ]

must get some boost gauge for my NA, lol.

every single n/a civic in bay area has one... and no, unfortunately i am not joking...

[halon]

I voted for EGR delete kit, but would've voted for stainless steel brake lines also given the opertunity to choose 2. Just aiming for things I think I could possibly afford soon! :P

[23BIGA]

brake lines sound good...

[WAGGZ]

I would like to se the BDE Performance VTC sprockets in the near future.

[LJ]

Can we get a ballpark # on the brake kit? Front & rear / front-only?

[offset_98]

3rd brake light would be good...but a big brake kit would work too...

[jirosj]

every single n/a civic in bay area has one... and no, unfortunately i am not joking...
Same goes for turbo timer :)

[dirtbiker194]

I voted for AMS radiator... only cause I need to buy one... thats what I need... that and 555 injectors. lol

[92silverz]

I voted for EGR delete kit, but would've voted for stainless steel brake lines also given the opertunity to choose 2. Just aiming for things I think I could possibly afford soon! :P

wats the point??? two plate and two gasket, psh. like someone on this forums stated before, if not $100 or higher, no point to do GB. and they are not expensive anyway, or make your own for stuff like these

[halon]

wats the point??? two plate and two gasket, psh. like someone on this forums stated before, if not $100 or higher, no point to do GB. and they are not expensive anyway, or make your own for stuff like these

A few things. I noticed EGR delete kit before I saw stainless steel braided brake lines. I have plans to buy both in the near future, everything else on this list is for people who are not me. I chose to vote for the item I had the most immedeate plans in buying.

[EckoInLasVegas]

BBK! Ill sell testies for a smokin deal on this BBK!

[TnkrsToyCo]

We'll offer what we can each month. If it isn't beneficial then don't buy it. Whether it be a .50 part of a $20k part. We can only offer what the sposors can offer to us. Sorry if it's not enough savings or not good enough for everyone.

[dashimmy]

Go TT oil cooler upgrade!!! Then the AMS radiator :)

[TnkrsToyCo]

BBK! Ill sell testies for a smokin deal on this BBK!

I thought we already owned your testes.

[EckoInLasVegas]

so we can buy fully built stage 4+ motors for half price???

[TnkrsToyCo]

What are you on Ecko, where do you see that. I was only using a $.50-$20k purchase as examples.
But yeah don't I wish we could get that kind of deal.

[jlsoz]

so we can buy fully built stage 4+ motors for half price???

time to open up a new line of credit!!

[Schepis]

What about 120k maintenance kit!?

[TnkrsToyCo]

^^Good question maybe we can come up with something in the next month or so.

[KevinZtwin]

looks like my oil cooler upgrade is finally going to win.

[pbr87]

it was on group buy for 1-pc rotors (which are heavier than Rosie O'Donnel). I want the 2-piece rotors. thanks.

I don't think they're that much heavier than the 2-pc. Are they?

[Twindragon]

Two words....Escort products!

[biabia]

I don't even want to know what a wait like that would be like for Escort parts... I'd go for some Escort doors I think though ;)

[Devils z]

escort products please !

[TnkrsToyCo]

The vote ends to night guys get on it.

[halon]

The vote ends to night guys get on it.

make it a nailbiter and give everyone else another vote :O