PDA

View Full Version : January 09 3ZC GB choices discussion and suggestion thread


N20Z
11-07-2008, 10:43 PM
Suggest and discuss possible January 09 3ZC GB choices in this thread.

Please remember if we have held a Group Buy on an item with-in the past year, we won't feature the same item again for at least a year. Many of the suggestions we saw in this thread last month were for items that have already been offered. Buy them while they are on special because it will be a while before you get another chance to.

Here is a list of what has been offered so far since we opened the 3ZC Store Jan 1st 08.

Jan 08
-99 JDM Facia Kit (with shaved option)
-Z1 SMIC kit (with ducts option)

Feb 08
-Z1 Upgraded Throttle Bodies (with chrome plated option)
-AMS Lightweight Underdrive Pulley (with OD water pump pulley option)

March 08
-Z1 GT675RS Turbo Kit (with 5 Downpipes option)
-Z1 Premium Short THrow Shifter

April 08
-Z1 Performance Clutch & Lightweight Flywheel Package (TT or NA)
-Tein SS Coilover Set (with EDFC option)

May 08
-Eagle Rods & Wiseco Pistons Combo
-AMS Max Flow TT Exhaust Manifolds
-Z1 Front 13" big brake rotor upgrade kit

June 08
-Chrome TT Intake Hard Pipes & SSQV BOVs
-Charcoal Z32 Floormats
-Upgraded Fuel Injectors & 300 Degree Rails

July 08
-Nismo Red Stitched Shift Knob with Red Stiched Shift and E-brake Boots
-Z1 GT600R Turbo Kit
-1999 JDM Taillights

August 08
-Stainless Steel Braided Brake Lines
-Z1 Twin Turbo Oil Cooler Upgrade
-13" Rotora 4 wheel brake upgrade kits

September 08
-AMS Lightweight Pulley Kit
-AMZ One Piece Twin Turbo Driveshafts
-60K Service Kit with tons of options

October 08
-Stainless Steel Engine Bolt Kit
-AMS Ajustable Camber Arms (front & rear)
-Z32 Dual Intake System

November 08
-AMS Twin Turbo Radiator
-OEM Cowl Panel Kit
-Nismo 615cc or 740cc Injectors with Deatschwerks adapters

December 08
-Voting going on now!

January 09
-Suggest products you would buy here.

TnkrsToyCo
11-07-2008, 11:04 PM
Jdm fascia.

Ahmed
11-07-2008, 11:18 PM
Charcoal floormats

bjz
11-08-2008, 12:42 AM
NA third brake light

91300zxttkid
11-08-2008, 12:44 AM
Smoked Turn signals and Fog light duct's in carbon or fiberglass combo.
METH KIT!!!
-George

JCbrezzySI32
11-08-2008, 01:36 AM
-99 JDM Facia Kit (with shaved option)
- Black third brake light

zforce
11-08-2008, 02:44 AM
cowls please

DualZ32
11-08-2008, 04:26 AM
Jdm Fronttttttttttttttttttttt

seaaan
11-08-2008, 07:49 AM
-TBL
- jspec tails
- Z1 premium short shifter
- z1 performance clutch/flywheel combo
- oem tps
- oem fuel pump

jdubs
11-08-2008, 10:58 AM
Southbend clutch kit TT
nismo red stitched shift knob
JDM front fascia

tomekr2k
11-08-2008, 11:09 AM
'99 JDM facia...............shave d please!

TnkrsToyCo
11-08-2008, 12:35 PM
cowls please

Cowls are in the store right now.
See thread:
http://www.300zxclub.com/showthread.php?p=1549800# post1549800

JCbrezzySI32
11-08-2008, 12:51 PM
99 jdm wing!

MAZE Z
11-08-2008, 02:08 PM
Brake lines
seat covers
Molding kit

czh5005
11-08-2008, 02:09 PM
JSpec Tails
JDM Fascia
Clear/Smoked Corners
OEM Fog Lights

Jamgo
11-08-2008, 03:00 PM
jdm front facsia!
z1 smic!
and also some down pipes!!

jschrauwen
11-08-2008, 03:00 PM
Guage package combo (52mm & 60mm)
Z1 Silicone Hardpipes
Complete silicone hose kit or groups of silicone hose combo's
OEM Brake Air Deflectors (the ones that attache to the Tension Rod)
Double Din Bezel (LHD & RHD)
LED Kit for Instrument Panel and Pods
Xenon Headlight Insert

thehalfazn
11-08-2008, 03:19 PM
Stillen Type III Lip please! :)

the_duke
11-08-2008, 04:49 PM
JDM fascia
JDM 99 wing

JCbrezzySI32
11-08-2008, 07:10 PM
Double Din Bezel (LHD & RHD)
LED Kit for Instrument Panel and Pods

coolcesitar
11-08-2008, 09:55 PM
99 fascia or escort front bumper
kaminari wing with options
stillen type 3 sideskirts
suspension stuff from powertrix
moulding set
xenon headlight inserts
jdm taillights
2-piece larger brake rotors w options

abad300z
11-09-2008, 01:42 PM
third brakelight!!!!!

ARA300ZX
11-09-2008, 04:47 PM
stillen sway bars.

what happened to the polls for december

OkitaSoshi
11-09-2008, 05:53 PM
Methanol/water Injection Kit
Lightweight 1-piece driveshaft

bjz
11-09-2008, 07:30 PM
Stillen Type III Lip

300zdett
11-10-2008, 02:46 AM
dw injectors

rockchucker
11-10-2008, 03:10 AM
TBL

N/A Aluminum D/S

300 Degree Fuel Rails and Injectors of choice.

Hyjaxe
11-10-2008, 07:05 PM
'99 J-Spec Fascia
Third Brake Light

jschrauwen
11-12-2008, 12:40 AM
LED Kit for Instrument Panel and Pods!!!!!!!!!
na 3rd brake light
carbon fiber fog light ducts
tt fuel pump
94-69 wing
3" down pipes
sway bars
LED Kit for Instrument Panel and Pods!!!!!!!!!
na 3rd brake light
carbon fiber fog light ducts
tt fuel pump
94-69 wing
3" down pipes
sway barsWhat's this? Dual personalities..lol?
I think the December vote list has you covered a fair bit.

ProjectCar300ZX
11-12-2008, 01:07 AM
Double Din Bezel (LHD & RHD)
LED Kit for Instrument Panel and Pods
Xenon Headlight Insert

+1 on these!

The LED kit would go great with my guage rings now! Xenon's are just sex...

z-owned
11-12-2008, 01:40 AM
n/a third brake light
coilovers (again)

WAGGZ
11-12-2008, 02:51 AM
OEM motor mounts. Less then $100! I need 'em bad.

TnkrsToyCo
11-12-2008, 12:27 PM
What's this? Dual personalities..lol?
I think the December vote list has you covered a fair bit.

Yes being dealt with.

pbr87
11-12-2008, 02:03 PM
RPS MAX Clutch + RPS segmented Alum. flywheel

TnkrsToyCo
11-12-2008, 03:10 PM
Please note:
Anyone else found to have or to be using duplicate accounts will be banned permanently from this site.

Not only is it against the forum rules/policy, but also gives us a false perspective to the GB's as we run the polls and discuss the future GB's

h8ter
11-13-2008, 12:17 AM
j-spec tails!

bbsalexaz
11-13-2008, 12:24 AM
fascia +1
z1 short shifter +1

flipsk8ter94
11-13-2008, 11:13 AM
alcohol/meth injection

drag radials

solid subframe/differential bushings

tarollio
11-13-2008, 02:21 PM
Not the first to ask hopefully not the last.

'99 J-Spec Fascia
Third Brake Light

Mr.Bullet
11-13-2008, 03:25 PM
'99 J-spec fascia
stillen sways
coilovers
1 pc driveshaft
smoked corners


any of the above would be nice :)

pjtortorich
11-13-2008, 03:49 PM
Motor/Tranny Mounts
Southbend TT Clutch Kit

Twindragon
11-13-2008, 03:50 PM
OEM motor mounts. Less then $100! I need 'em bad.

2nd^

lumiester123
11-13-2008, 04:05 PM
What are the chances of another 99 fascia group buy?

I NEED ONE PEOPLE!!! For my B-day???

Look at this and be a man and don't stare away.

http://i404.photobucket.com/albums/pp129/turboboy123/08-2.jpg

92' WTE3Z
11-15-2008, 03:11 PM
Specialty Z 3" Expanded Down Pipes (5 Bolt)

Stillen SMICS

ryzcar91TT
11-15-2008, 09:28 PM
jdm fascia shaved
3" dp 3"-2.5" tp combo (since it looks like its not gonna make it this month)

jschrauwen
11-15-2008, 09:44 PM
jdm fascia shaved
3" dp 3"-2.5" tp combo (since it looks like its not gonna make it this month) Specialty Z 3" Expanded Down Pipes (5 Bolt)
Stillen SMICS
I think requesting the Alloy ToyZ 3" DP's and resonated 3" to 2.5" TP's and the Z1 SMIC's might see better success.

92' WTE3Z
11-16-2008, 04:42 PM
I think requesting the Alloy ToyZ 3" DP's and resonated 3" to 2.5" TP's and the Z1 SMIC's might see better success.

I didnt know about them ^ in that case

Alloy ToyZ 3" DP's

Z1 SMIC's (again please)

d-mka
11-16-2008, 05:16 PM
JDM Front :)

Ali300zx
11-16-2008, 05:20 PM
manifolds and 3" downpipe/testpipe

TheOrteganator
11-16-2008, 06:41 PM
I definitely need a new third brake light. (N/A)

JDM front will be in my plans probably late spring.

And Stillen Swaybars if they don't get picked for the December.

asdad
11-16-2008, 09:16 PM
-99 JSPEC front fascia +1
-Z1 SMIC kit +1
-Z1 Stock fitment upgraded brake kit?
Is it possible to do a group by for KYB AGX struts and Ground controls?

JCbrezzySI32
11-17-2008, 12:30 AM
99 jspec facia has to be on this one it would be a big seller! Please... i beg you! lol

DualZ32
11-17-2008, 01:48 AM
jdm front with optional mesh grill and lights !!!!!!!!!!!!!!!!!!!!!!!!! !!!!

judyy08
11-17-2008, 02:32 AM
jdm fascia and tail lights

Twistedrobofish
11-17-2008, 06:11 AM
guage Package Combo (52mm & 60mm)
Z1 Silicone Hardpipes
Complete Silicone Hose Kit Or Groups Of Silicone Hose Combo's
Led Kit For Instrument Panel And Pods
Xenon Headlight Insert

+1

Mark2890
11-18-2008, 08:06 PM
99 Jspec Taillights! ! ! And at least one engine/driveline upgrade specifically for NA.

SDB300ZX
11-18-2008, 08:18 PM
JDM with shaved option

z32hp*700*
11-19-2008, 06:02 PM
Jdm fascial
Specialty Z 3" Expanded Down Pipes (5 Bolt)
testpipe/ manifolds

b15sent
11-20-2008, 09:21 PM
T-top weatherstripping that goes on the car would be very nice as its way overpriced.

roxyboi_333
11-21-2008, 08:34 PM
*N/A driveshaft - optionsal
*Z1 Stainless brake lines
*Z1 Solid Subframe Bushings
*Z1 Front 13" big brake rotor upgrade kit + ATE super blue or Motul RBF 600 Brake Fluid

krwgtr
11-23-2008, 07:35 PM
z1 smic's

91300zxttkid
11-23-2008, 09:08 PM
a Defi Gauge package would be nice..
-Oil pressure
-Water temp
plus controller
-George

R3N0
11-26-2008, 01:00 AM
-99 Jspec front bumper w/ shaved option
-Kaminari sideskirts w/ door fillers
-Kaminari spoiler

seedweed23
11-26-2008, 04:19 AM
stillen lip
instrument panel LED kit

any engine parts!
hicas full elimination kit

jschrauwen
11-26-2008, 02:34 PM
stillen lip
instrument panel LED kit
any engine parts!
hicas full elimination kitNice to see others find this a worthwhile item. I'm surprised that Z1 hasn't come up with some sort of a kit (with instructions) by now. Like the engine bolt dress-up kit from a previous GB, this particular kit could include the instrument panel and the two instrument pods as well as the dome light and perhaps the under dash lights as well. On completion of the GB, Z1 could retain this as a regularly stocked item. If Z1 were to buy the components in bulk (much like the engine bolt dress-up kit) the could offer substantial savings to the consumer. Add to this that any improvements in tech associated with this could also be integrated to maintain a state of the art product.
What do think Russell? Could this sort of thing fly?

Pornographers Car
11-27-2008, 02:48 PM
Tbl

michaelsevilla
11-27-2008, 07:02 PM
ALL OF YOU ARE CRAZY!

AMZ STAGE II TURBO KIT

555cc Injectors

METH KIT

TnkrsToyCo
11-27-2008, 07:09 PM
^we got to get you running first.

huyttz
11-27-2008, 08:49 PM
i'd be in for 99 Spec JDM taillights.

Jasen
11-28-2008, 12:16 AM
NA Third brake light, I'd buy one guaranteed.

Z_wrecker
11-28-2008, 12:37 AM
99 jspec tails
led kit

michaelsevilla
11-28-2008, 03:04 AM
^we got to get you running first.
didnt mean to jump the gun steve :)
but shit while we're doing that we might as well kill all birds with one stone :D

Sucks because I never knew what it was like to drive a true healthy TTZ until I drove my friends RHD 2 + 2, ONCE. But when I get my car back after everything is said and done..it'll be a different animal.


































AMZ STAGE II TURBO KIT DAMNIT!

555cc injectors!! lol

huyttz
11-28-2008, 03:28 AM
if i had the money, i'd be right there with you on the turbo and injectors, michael... so just hold off a bit. ;)

plastercaster
11-29-2008, 03:12 PM
As many have suggested:
JSPEC tails
Smoked/clear turn signals
z1 premium short shift
C's short shifter would be great
radiator air guide
lightweight pulley set
black oem shift knob/boot

That would hold me over for some time.

Spawn
11-29-2008, 10:05 PM
Escort Racing Front Fascia

JK
11-30-2008, 01:56 AM
Meth Kit!
All i ask, Got the sway bars this month.

minor threat
11-30-2008, 06:03 AM
TBL
99' fascia

bbsalexaz
11-30-2008, 06:09 AM
TBL
99' fascia

edit: TBL and shaved 99' fascia.

drewbagd
11-30-2008, 11:22 AM
na TBL
EBC
Stillen GTZ Lip (or type III I guess)

invader
11-30-2008, 06:39 PM
300 degree din guage holder!
3rd brake light (NA style)

2nd on defi guage package

CGdrivenZX
11-30-2008, 07:49 PM
molding kit would go nice with the cowl kit we just had
fog lights/corners
radiator hose kit/nismo thermo option
kaminari wing

deebz
12-01-2008, 11:09 AM
If the 99' front makes it I'm gonna have to start whoring myself on the corners to pick it up

pbr87
12-01-2008, 12:12 PM
Methanol Injection Kit!

thebrownbomber
12-01-2008, 12:16 PM
stillen lip
instrument panel LED kit


a LED-everything interior kit would be great.

DualZ32
12-01-2008, 03:35 PM
I would be interested in a 300degree din holder as well

anyone know who i should contact about offering a product for group buy? I PM'ed N20Z but got no reply.

I can make a complete diy led kit (no more need to send in the pods as long as you can solder) with 2 year warranty for all the lights in the car (other than tail lights, sidemarkers and turn signals)

Ive sold hundreds of kits already, with no problems!

Some Reviews http://www.300zxclub.com/showthread.php?t=140099

An AD

http://twinturbo.net/nissan/300zx/forums/classified/view/131590/LED-Lighting-Kits-Many-Colos-NO-Hotspots-Now-Back-In-Stock.html (http://twinturbo.net/nissan/300zx/forums/classified/view/131590/LED-Lighting-Kits-Many-Colos-NO-Hotspots-Now-Back-In-Stock.html)

duvall348
12-01-2008, 08:58 PM
+1 for:
Shaved 99 Front
99 Tails
NA TBL

Pretty please :)