February 09 3ZC GB choices discussion and suggestion thread

[N20Z]

Suggest and discuss possible February 09 3ZC GB choices in this thread.

Please remember if we have held a Group Buy on an item with-in the past year, we won't feature the same item again for at least a year. Many of the suggestions we saw in this thread last month were for items that have already been offered. Buy them while they are on special because it will be a while before you get another chance to.

Here is a list of what has been offered so far since we opened the 3ZC Store Jan 1st 08.

Jan 08
-99 JDM Facia Kit (with shaved option)
-Z1 SMIC kit (with ducts option)

Feb 08
-Z1 Upgraded Throttle Bodies (with chrome plated option)
-AMS Lightweight Underdrive Pulley (with OD water pump pulley option)

March 08
-Z1 GT675RS Turbo Kit (with 5 Downpipes option)
-Z1 Premium Short THrow Shifter

April 08
-Z1 Performance Clutch & Lightweight Flywheel Package (TT or NA)
-Tein SS Coilover Set (with EDFC option)

May 08
-Eagle Rods & Wiseco Pistons Combo
-AMS Max Flow TT Exhaust Manifolds
-Z1 Front 13" big brake rotor upgrade kit

June 08
-Chrome TT Intake Hard Pipes & SSQV BOVs
-Charcoal Z32 Floormats
-Upgraded Fuel Injectors & 300 Degree Rails

July 08
-Nismo Red Stitched Shift Knob with Red Stiched Shift and E-brake Boots
-Z1 GT600R Turbo Kit
-1999 JDM Taillights

August 08
-Stainless Steel Braided Brake Lines
-Z1 Twin Turbo Oil Cooler Upgrade
-13" Rotora 4 wheel brake upgrade kits

September 08
-AMS Lightweight Pulley Kit
-AMZ One Piece Twin Turbo Driveshafts
-60K Service Kit with tons of options

October 08
-Stainless Steel Engine Bolt Kit
-AMS Adjustable Camber Arms (front & rear)
-Z32 Dual Intake System

November 08
-AMS Twin Turbo Radiator
-OEM Cowl Panel Kit
-Nismo 615cc or 740cc Injectors with Deatschwerks adapters

December 08
-Stillen Sway Bars
-1999 JDM Xenon Headlights
-Z1 Silicone TT intke Hoses

January 09
-Voting going on now!

February 09
-Suggest products you would buy here.

[pjtortorich]

-Third Brake Light for NA
-Engine Gasket Kit
-Engine Wiring Harness
-Motor Mounts/Transmission Mounts
-3" Downpipes
-South Bend Stage V FE Seies Clutch

[JCbrezzySI32]

Jspec front again! i demand it please..

[Ali300zx]

manifolds

3" downpipes

Z1 675 turbos

[Z-CARR]

Yes... AMS manifolds, please.

[N20Z]

Jspec front again! i demand it please..

Likely option for Feb, so don't give up!

[jschrauwen]

Can you give this some consideration and post as to it's viability?
http://www.300zxclub.com/showpost.php?p=1568656&postcount=85

[lumiester123]

Likely option for Feb, so don't give up!

99 front bumper PLEASE!!!!!! I have been asking for this for the past three months!!!!!!!!!!!!!!!!!!! !

[TheDeadKing]

Third Brake Light for NA

[N20Z]

Can you give this some consideration and post as to it's viability?
http://www.300zxclub.com/showpost.php?p=1568656&postcount=85

We will look into it as time permits, however in general we shy away from "12 Volt'" type "upgrades" in fear we will end up known for selling 18" kickers and window tint.

[jschrauwen]

We will look into it as time permits, however in general we shy away from "12 Volt'" type "upgrades" in fear we will end up known for selling 18" kickers and window tint.Hmmmm, this doesn't seem very hopefull. Already there appears to be a negative perspective before thorough search into viability?
The obvious demand has been noted in at least the last 3 GB suggestion threads.
Don't live in fear of other peoples perceptions and don't let it control your decision making process. Understandably, there are limits/limitations as to what would be viable GB items. Just because they're not oem or large scale manufactured items doesn't mean they can't be a worthy prospective.
Case in point - Joe's SS Engine and Splash Shields. Small time operation that capably met GB demands. Win/Win for both the small time operation and the 3ZC membership as no large scale manufacturer would probably want to take on unique projects like that.
Let's give it the benefit of the doubt for now and reserve final decision after thorough research.

[dogpile5]

Jspec shaved bumper (does anyone remember how much this was last Jan? I'd like to start budgeting for it now)
Gauge combo's
hi-flo universal cats

[JCbrezzySI32]

Jspec shaved bumper (does anyone remember how much this was last Jan? I'd like to start budgeting for it now)
Gauge combo's
hi-flo universal cats

^ same i would like to know if anyone who bought their 99 facias last january could tell me how much they paid. I have a good feeling this item might show up in the feb group buy!! and i want to be ready..

[300ZX_2+2_TT]

90-93 TT spoiler. Or one of the similar options

[DT444T]

Strut Tower Bars for TT

[Anskiere]

pistons, GT600R kit or GT675RS kit or fascia

[pbr87]

A few ideas:
-RPS MAX clutch w/ segmented flywheel option
-RPS carbon-carbon clutch
-Carbing strut tower braces
-AMS full suspension kit (now offered by Z1)
-VIS carbon fiber hood?
-VIS carbon fiber hatch?
-AEM wideband

[Servoc]

99 Front bumper
T-top hook finisher
http://www.conceptzperformance.c om/Cart/images/635l.jpg

Moulding Kit to include the option for either:
Windshield/T-top mouldings
http://www.z1motorsports.com/imagemagic.php?img=images/windshield%20trim%207-11-06.JPG

and/or Door mouldings
http://www.z1motorsports.com/imagemagic.php?img=images/doormoldings14.jpg

[z0MG]

Third Brake Light for NA

I second that. TBL almost made it for September's GB so I'm voting for it again.

[conradzx]

Headers for Z32 NA
Strut Tower for NA
Nose panels

[TheOrteganator]

NA third brake light... mine is starting to look a bit red.

99 jdm front bumper, that cracked bumper is really starting to bother me.

[Twindragon]

99 Front bumper
T-top hook finisher
http://www.conceptzperformance.c om/Cart/images/635l.jpg

Moulding Kit to include the option for either:
Windshield/T-top mouldings
http://www.z1motorsports.com/imagemagic.php?img=images/windshield%20trim%207-11-06.JPG

and/or Door mouldings
http://www.z1motorsports.com/imagemagic.php?img=images/doormoldings14.jpg


2nd + IonicDynamics TT replacement spoiler.

[bbsalexaz]

1. NA TBL
2. EFI harness
3. ECU upgrade..... <----please! $250 for someone to reprogram and send it back? It really can't be that intense!
4. Reverse glow indigo gauges. (found that kind of thing on zcentre.co.uk but i dont know if they are reputable.) [AND IT'LL GO GREAT WITH THE RINGS IN JANUARY!!!!!!!!!!!!!!]
5. OEM style leather seat cover. (replaces tweed style cover.)

[turbodsm866]

Meth injection kits!!

[silvermagma]

About this time I will be doing a rebuild most likely...

PE 850cc Injectors in a 300 Degree Fuel Rail
Engine Gasket Set
Wiseco Pistons with the Option for people bored over
Eagle Rods
OR - A Wiseco/Eagle Set like done back in May
Lower Radiator Hardpipe
JDM Taillight Set (3 piece)

[threehundredzx]

Third brake light
moulding kit
t-top finisher

[bjz]

-Third Brake Light for NA
-t-top finisher
-windshield moldings

[Ahmed]

-Charcoal floormats
-LED kit

my bday is in February, please hook up the floormats for me!...i've been waiting on those forever!

[IsThatJJ]

Stillen gtz lip

[michaelsevilla]

+1 Meth kit

AMZ Stage II turbos. *COME ON PEOPLE!!!*

Widebands we definatly need widebands in here!!

[djchrisepooh]

-Greddy Profec Type II Boost Controller (Goes Great With Those 740's you got in JUNE OR NOVEMBER!)

-Labree Ultimate Split Downpipes/Testpipes (4 bolt/5 bolt) *EXCELLENT WITH CURRENT TURBOS ON GB*

And why don't we cool down those turbos with a...

-Greddy Turbo Timer!

-LED Car Kit [Brings out the Beauty of our dash with those RINGS!]

[jschrauwen]

-Labree Ultimate Split Downpipes/Testpipes (4 bolt/5 bolt) *EXCELLENT WITH CURRENT TURBOS ON GB*
Why not ask for the Alloy ToyZ super split 3" DP's and 3"/2.5" TP's? I think they'll be easier for the 3ZC Store to acquire.
I thought it was Dupree and not Labree.

[Spawn]

Greddy Profec Type II Boost Controller
Tein Flex Coilover System w/EDFC
Escort Racing Front Fascia

[jschrauwen]

Coilovers other than Tein.

[h8ter]

j-spec tail lights
smoked corners

[itZj0k3r]

LED interior kit
Stillen GTZ lip
Stillen III Side Skirts with door fillers
NA Headers
NA 1PC Driveshaft
Smoked corners

any of those ill be happy with!!
we need some stuff for the NA peeps

[TIG3I2]

SPL Coilovers -- is this a possibility?
TBL
Aluminum 12x1.25 lugs for aftermarket wheels

[Jamgo]

Hah how come no one is voting for the 99 spec facsia again this time.. even tho last discussion it was most asked for, now everyone doesnt even try?

-99 spec fascia!, my current bumper is cracked and insurance wants 700$ to have it replaced, with another stock bumper, so i was gonna go with the j spec...

-Greddy profec b type 2 boost controller for sure!!
-Z1 smic!

[Mr.Bullet]

1. JDM front bumper!
2. n/a 1 pc driveshaft
3. b&b exhaust

[czh5005]

Stillen GTZ Lip
Some kind of wheel package?

[JCbrezzySI32]

Hah how come no one is voting for the 99 spec facsia again this time.. even tho last discussion it was most asked for, now everyone doesnt even try?

-99 spec fascia!, my current bumper is cracked and insurance wants 700$ to have it replaced, with another stock bumper, so i was gonna go with the j spec...

-Greddy profec b type 2 boost controller for sure!!
-Z1 smic!


Me and you think alike man! now nobodys voting for them 99 jspec facia!

[gnozahs]

LED interior kit
Cat-back exhaust
ECU

[fred's300zx]

99 jspec fascia or
stillen gtz lip.

[vinnyme453]

Megan Quad Tip Stainless Exhaust!

[jb.michael]

Tein SS/Flex Coilovers!
5-bolt DPs!
Z1 SMICS!

[nucmedtech]

EFI Harness!!!

[sadairk2]

TBL or TT 90-93 TT wing
AEM wideband
t-top finisher
Ichiba spacers
t-top bags

[bbsalexaz]

cheaper 120k timing kit.
Motor mounts
nismo trans mount

[HicasZ]

1. Boost controller (Apexi AVRC or Blitz SBC I-D III) or greddy if we must.
2. EFI harness
3. Stainless Steel bolt kit
4. short shifter with bronze bushings....

those would be great.

[sadairk2]

^^^ Check ultrarev.com for the Fidanza short shifter. They are most inexpensive that I have found.

[91300zxttkid]

Defi gauges!!!
Preferably
-Oil pressure
-Water temp
-the controller
all 3 as a package deal..
-George

[coolcesitar]

JDM bumper..
koyo radiatior
larger rotor upgrade
escort hood/bumper
stillen sideskirts type III
wheel spacers

[Raiders3986]

jdm tails

[cjdubs]

na tbl
na 1 piece drive shaft

[blacktwin]

i would like to see these items
1. 90 to 93 spoiler
2. jspec tail lights
3. led kit and cluster ring combo

[TnkrsToyCo]

Jspec Tails are $298.00 without the center panel right now in the store.
Left and Right 1999 JDM Z32 Outer Taillight Sections. 2 piece set.

http://www.300zxclub.com/store/product_info.php?cPath=51 0_527&products_id=3101

[yammaxx]

Nitrious NX kit!!!

[seaaan]

jspec tails
TBL

[z-owned]

shift boots
tbl
coilovers again or a shock like agx's or something.

[b15sent]

EFI Harness

T-top finishers

T-top seals that go on the car... These are way to expensive for what they are!

[halon]

I would love to see some exterior restore things on GB;

door/t-top/hatch seals

Window mouldings (strip along bottom of the window on the outside.)

maybe something suspension'ey? SPL Coilovers, or SPL front + rear upper control arms?

[edit] or maybe affordable High-flow cats?

[czh5005]

52/60mm x 3 gauge DIN mount

[drewbagd]

2+2 5 speed shell...

[MAZE Z]

Jspec Tails
door seals, make then close nice and tight like it was new, instead to the cheap door sound
Window and t-top moldings
SS brake lines

[300ZX_2+2_TT]

gauge pod that goes above the radio bezel

[iEatRycedCivics]

kurumaZ moulding kit

[invader]

300 degree din gauge
3 glow gauges

[Martinezs1004]

maybe some nice 30mm zinc brake rotors, slotted and drilled?

[b15sent]

Windshield/t-top trim would be nice

Jspec front- depending on the price

120k kit- if it can be made cheaper

EFI harnesses- Maybe have all the options available for cheaper.. idk if thats possible.

[plower]

T-Top Trim /Moldings

[b15sent]

A couple more good ideas might be some adjustable front and rear upper control arms. Maybe with tension rods if thats possible. My alignments off and it can't be fixed without adjustable fronts. :)

[turboswap]

wide band

[jdmz32]

JDM SPLASH GUARDS FOR 2+0 AND 2+2 GUYS!!! COME ON!!!:group:

[SMZTallGuy]

Alloy Toyz 3.0" Stainless Steel 5-Bolt Downpipes
Alloy Toyz 3.0" to 2.5" Stainless Steel Testpipes

Sold together...

[R3N0]

-JDM 99 fascia
-Stillen Type III side skirts + door fillers
-Window moldings/trim
-Kaminari spoiler

[IsThatJJ]

im gonna add this to my previous post since i can't edit it.

LED Interior car kit
TBL

[SleepyzZz32]

jdm front bumper
jspec taillights
go go

[na300zx (OH)]

AEM EMS w/ optional equipment (such as intgrated dual wideband, dual EGTs...)

[Ahmed]

Charcoal floor mats
t-bolt clamps for hard pipes
LED kit
chrome dress-up stuff

[dirtbiker194]

LED Kit.
Wiring Harness

[xblackxviper]

a clutch kit.....
either z1 (i know we already had it but please)
or RPS

[OkitaSoshi]

Methanol/Water Injection

[djchrisepooh]

gauge pod that goes above the radio bezel

YES!YES!YES!
With the option of the 3 pod gauge or Flat face for custom applications( I want to put my pioneer Z3 in it!)
AND I CANT SAY THIS ENOUGH!
Greddy Profec B Type II Boost Controller!!!
and that LED Kit is wonderful!!!

[plastercaster]

JSPEC tails
Smoked corners
ams manifolds
labree exhaust, downpipes

JSPEC tails would sell well, a lot of us have been suggesting them and the last time around they were pretty well recieved.

[JCbrezzySI32]

some kind of exhaust for 2+0 NA or jspec front or third brake light

[CGdrivenZX]

shaved 99 facia
t top finisher
complete moulding kit (doors/windshield)
kaminari wing/LED option

[EckoInLasVegas]

I cant think of anything I really want right now. I am putting the Z on hold after mid year next year for a while! :P

But, I would like to see Poly Subframe bushings or a master bushing kit. I need about 1/3 of them still!

[TheBAYtoLA]

time for some discounted downpipes

[Ahmed]

listen people...jspec tails are available for $298 right now anyways for the L+R pieces

http://www.300zxclub.com/store/product_info.php?cPath=51 0_527&products_id=3101

[halon]

shaved 99 facia
t top finisher
complete moulding kit (doors/windshield)
kaminari wing/LED option

I agree with this post, although personally I have no interest in the wing. Maybe

99 facia
t top finisher
complete molding kit
some kind of sexy EBC.

awe yea.

[EckoInLasVegas]

LED light kits to include...

-Dash lights
-Done and reading lights
-rear hatch light
-license plate lights
-rear tail lamp, turn signal and reverse lights
-front turn signals
-foot/floor board lights



We all know what bulb #'s to get, but I just dont feel like doing all the research to get all the bulbs together. I figure all yellow-ish lights should be white, while all signal lighting should be the appropriate color. choice of dash lights in avail colors?

Maybe? :D

[moonlite5hadow]

Third brake light
moulding kit
t-top finisher

ditto.

i still want a rebuilt NA engine... :)

[TheOrteganator]

'99 JDM Front Fascia. I'll definitely be ordering one if it makes it.

[silvermagma]

Dual Inovative Wideband Kit
CP Pistons with Bore and Compression Options
Eagle Rods
Gasket Kit (http://www.conceptzperformance.c om/Cart/description.php?II=1355&Car_Type=300&UID=2008122701025868.113. 201.136)
OEM TT Oil Pump
ACL Rod and Main Race Bearing Kit
ARP Hardware (Head and Main Stud Kits)

[JCbrezzySI32]

'99 JDM Front Fascia!!

[Z_wrecker]

specialty z catback
99 jspec tails
how about some wheels???
work emotion xd-9 :) (or your choice of work wheels)