May 09 3ZC GB choices discussion and suggestion thread

[N20Z]

Suggest and discuss possible May 09 3ZC GB choices in this thread.

Please remember if we have held a Group Buy on an item with-in the past year, we won't feature the same item again for at least a year. Many of the suggestions we saw in this thread last month were for items that have already been offered. Buy them while they are on special because it will be a while before you get another chance to.

Here is a list of what has been offered so far since we opened the 3ZC Store Jan 1st 08.

Jan 08
-99 JDM Facia Kit (with shaved option)
-Z1 SMIC kit (with ducts option)

Feb 08
-Z1 Upgraded Throttle Bodies (with chrome plated option)
-AMS Lightweight Underdrive Pulley (with OD water pump pulley option)

March 08
-Z1 GT675RS Turbo Kit (with 5 Downpipes option)
-Z1 Premium Short THrow Shifter

April 08
-Z1 Performance Clutch & Lightweight Flywheel Package (TT or NA)
-Tein SS Coilover Set (with EDFC option)

May 08
-Eagle Rods & Wiseco Pistons Combo
-AMS Max Flow TT Exhaust Manifolds
-Z1 Front 13" big brake rotor upgrade kit

June 08
-Chrome TT Intake Hard Pipes & SSQV BOVs
-Charcoal Z32 Floormats
-Upgraded Fuel Injectors & 300 Degree Rails

July 08
-Nismo Red Stitched Shift Knob with Red Stiched Shift and E-brake Boots
-Z1 GT600R Turbo Kit
-1999 JDM Taillights

August 08
-Stainless Steel Braided Brake Lines
-Z1 Twin Turbo Oil Cooler Upgrade
-13" Rotora 4 wheel brake upgrade kits

September 08
-AMS Lightweight Pulley Kit
-AMZ One Piece Twin Turbo Driveshafts
-60K Service Kit with tons of options

October 08
-Stainless Steel Engine Bolt Kit
-AMS Adjustable Camber Arms (front & rear)
-Z32 Dual Intake System

November 08
-AMS Twin Turbo Radiator
-OEM Cowl Panel Kit
-Nismo 615cc or 740cc Injectors with Deatschwerks adapters

December 08
-Stillen Sway Bars
-1999 JDM Xenon Headlights
-Z1 Silicone TT intke Hoses

January 08
-Z1 Chrome Gauge Rings
-Nismo 555 cc Fuel Injectors (1990-94 TT)
-Z1 Lower Radiator Hardpipe with Silicone Elbows

February 09
-AMZ Aluminum Driveshafts
-Z1 Sidemount Intercooler Kits
-'99 JDM Front Fascia Packages

March 09 (Group Buys going on now!)
-Subframe Bushing Collars
-AMS MaxFlow TT Exhaust Manifolds
-Z1 GT675RS Turbo Kit
-Z1 Premium Short Thorw Shifter

April 09
-Voting going on now!

May 09
-Suggest products you would buy here.

[N20Z]

The 13" Front brake rotor upgrade and a new updated version of the Z1 upgraded throttle bodies will be 2 of the 10 items up for voting next month.

[T3ku]

Ill go for the TBs.

Adjustable suspension kit, control arms, camber arms, tension rods. Front & Rear or at least rear.

[91300zxttkid]

HUGE SECOND on the Adjustable suspension kit, control arms, camber arms, tension rods!!!
-George

[doomday300]

The 13" Front brake rotor upgrade and a new updated version of the Z1 upgraded throttle bodies will be 2 of the 10 items up for voting next month.so, those ^ will be posted for the may voting? If so, ill defently hit both up. I was hoping the brake kit for april would be the kit with the 13" rotors from Z1.

for may
Howe z1 radiator
ams underdrive pulley (or full kit)
jspec tails
300 degree fuel rails with 740 injectors

[leno]

Complete engine internals upgrade kit!

Wiseco pistons, Eagle Rods, ARP head bolts, complete Ferrea Valvetrain.

[kevsz32]

Jspec Tails!!!!!!

[cheezmonta]

I'd be interested in picking up a Howe z1 radiator if it was on GB.

[tmzx19]

TBs for sure

[Fairlady_z]

HUGE SECOND on the Adjustable suspension kit, control arms, camber arms, tension rods!!!
-George

what he said...

[TheOrteganator]

The 13" Front brake rotor upgrade and a new updated version of the Z1 upgraded throttle bodies will be 2 of the 10 items up for voting next month.

If the 13" rotor upgrade goes up, I will buy.

I'm also in for some coilovers, either SPL or the new Powertrix ones... but it would have to be either or for me. No money for both.

[Farm_Z32]

what he said...

what both of them said

[Farm_Z32]

HUGE SECOND on the Adjustable suspension kit, control arms, camber arms, tension rods!!!
-George

that and a bbk

[PoorKid]

Z1 Chrome Gauge Rings

[jigga jatt]

120k timing belt kit

[ontheverge]

HUGE SECOND on the Adjustable suspension kit, control arms, camber arms, tension rods!!!
-George

i'm totally in for this

[TheDeadKing]

Tbl!

[IsThatJJ]

i'd like to see some powertrix suspension goodies. camber arms, tension rods, toe rods. seems like the Z community is thirsting for suspension upgrades.

[Black91TTZ]

Nistune
Moldings
300 degree rails and injectors
Blitz SBC id-iii

[Bohemiangod]

rear suspension pieces sounds good.

[Attridge]

I'd like to see Labree Cat-back exhaust, '99 Jspec Tails, LED lights for Cluster and Pods

[quizzkidd09]

120k kit
cowl grilles
eibach springs

[pgmahan76]

99 tails!!!!!

[JK]

Adjustable Suspension parts would be great!

[jigga jatt]

120k kit come on guys!

[dirt114]

-TB's
-Deatchwerks injectors and adaptors
-z1 howe radiator or ams radiator
-3" 4 bolt down pipes
-z1 upgraded oil cooler

[dirt114]

or a tranny rebuild kit!! with new gears and syncros
and maybe even a rebuild kit for a 98+ tranny!!

[rage941]

HKS exhaust!!!

[Imua300zx]

how about those fixated on blank titanium keys?

[thehalfazn]

Please please please the Stillen Type III lip

[fastVG30DETT]

injectors

[zil32]

TB's
300 degree fuel rails
Moldings

[dirt114]

how about those fixated on blank titanium keys?

they have said before they have a tough time getting oem parts any cheaper at all than the regular price. thats why you dont see the tbl, jspecs, and titanium key every month. its not that ppl dont want them...

[z gold pearl]

120k Timing Belt Kit with all options

[BrewZer90]

NA test pipes
Stillen GTZ Lip

[pbr87]

I'd REALLY like to see some kind of twin-plate clutch up there.


Tein coilovers again would be nice too. I missed them last year.

[seaaan]

Labree catback exhaust
Jspec tails
TBL

[czh5005]

TB's and AMS Rad

[dirt114]

^2nd

[SinCityZX]

Nismo 740cc Injector Kit (90-94 TT) w/ machined lower plenum
Greddy Profec B SPEC2 Boost Controller
AMS Twin Turbo Radiator Upgrade
AMS Lightweight Pulley Kit

[andy1972]

J Spec Tails ....

[TwinTZ]

TOM's FMIC w/2.5" piping

[rabbiz(Philly)]

Labree Cat-back exhaust

[SMZTallGuy]

GT725r's

[SMZTallGuy]

TOM's FMIC w/2.5" piping

x2 for the win

[kdavz32tt]

Needed right now;

-Deatchwerks adapter/nismo injectors
-leather shift boot and knob WITHOUT red stitching (please)

haven't seen this in the last year, or am I wrong? :)

[czh5005]

Please please please the Stillen Type III lip

NA test pipes
Stillen GTZ Lip

http://www.stillen.com/product.asp?id=STILIPSPL0 1&c=EX&year=1990&make=NISSAN&model=300ZX At $174.97 how much cheaper do you want them?

[zil32]

AMZ Performance Urethane Motor Mounts!
http://www.300zxclub.com/store/product_info.php?cPath=51 0_519&products_id=3310
Alloy Toyz 3.0" Stainless Steel 5-Bolt Downpipes
http://www.300zxclub.com/store/product_info.php?cPath=51 0_512&products_id=3047
300 Degree performance fuel rails
http://www.300zxclub.com/store/product_info.php?cPath=51 0_525&products_id=2759

[Attridge]

Ya there are a few votes for Labree and '99 Jspec Tails!!

[BrewZer90]

Everytime I go to the Stillen site I can never find that spoiler, or any price for it!

[93daytona]

How about a silicone hose kit:

-The 4 hoses for the IAC / air regulator assembly (already sold as a kit by Z1)
-Front PCV hoses (front of intake valve covers)
-left and right PCV valve hoses (sides of plenum)
-rear PCV hose (goes to ds exhaust valve cover)
-Power steering J-hose
-Straight power steering return hose

Basically all the hoses you'd have easy access to if you were pulling the plenum.

Z1 already knocks almost 16% off if you buy the 4 IAC / air regulator hoses as a kit, so I think there's enough markup on them to make a group buy on a more inclusive kit worthwhile.

[Jamgo]

Greddy Profec B SPEC2 Boost Controller!!

[flipsk8ter94]

If they dont get put up this month:

Hicas elimination kit

Water injection kit

both of these are awesome and its evident that people want them from this months voting

[daxnizmo]

GTZ Turbo lip
J-Specs
Tein S-tech springs


^^^Thats what I'm in the market for personally.

[BrewZer90]

^+1

[doomday300]

i wouldn't mind some tein coilovers.

[rspgtesc]

I'm down for;
90-93 TT 5spd new EFI Harness
Deatchwerks adapter/nismo injectors

[czh5005]

http://www.stillen.com/product.asp?id=STILIPSPL0 1&c=EX&year=1990&make=NISSAN&model=300ZX At $174.97 how much cheaper do you want them?

Everytime I go to the Stillen site I can never find that spoiler, or any price for it!

Are you serious, just click the link man! It was like 4 posts above yours ...

[BrewZer90]

I was looking in the wrong section. Thanks

[Spawn]

Greddy Profec B SPEC2 Boost Controller

[CGdrivenZX]

120 kit w/ PE belt, hduty idler studs, and nismo thermo

[90NA300ZX]

Something that i dont think has ever been suggested but i'm sure the vast majority of us could benefit from having.....and i just noticed they're sold by Z1 now....


Mickey Thompson street radials on a spare pair of Z32 TT wheels...i suggest with the extra wheels so we don't have to rock them every day.

4 wheels currently on the car for daily driving, and the new pair of Z wheels on radials for those days you're feeling spunky, or heading to the track.


anybody?

[pilotz32tt]

Z1 Howe Radiator without the Z1 Logo? With brackets please!

[Kyle350]

Body Moldings
T-Top Finisher Bar
Third Brake Light

[evan3(ca)]

How about offering Z1's complete line up of molded silicone hoses?

[uz32tt]

Z1 TB
Jspec Tail Lights
AMS Suspension Parts

[jbutler17]

3 inch downpipes and testpipes. (5 bolt)

[soup1d]

Something that i dont think has ever been suggested but i'm sure the vast majority of us could benefit from having.....and i just noticed they're sold by Z1 now....


Mickey Thompson street radials on a spare pair of Z32 TT wheels...i suggest with the extra wheels so we don't have to rock them every day.

4 wheels currently on the car for daily driving, and the new pair of Z wheels on radials for those days you're feeling spunky, or heading to the track.


anybody?


Agreed. I was gonna purchase these soon anyways.

[thebrownbomber]

all moldings
T-top finisher bar

[WthreeZ]

Z1 13inch rotors. Enough said.

[SleepyzZz32]

I'm looking at:
Molding kit
Jspec tails

[michaelsevilla]

Agreed. I was gonna purchase these soon anyways.

3rd! Anyone else mickey thompsons drs!!

[doomday300]

3rd! Anyone else mickey thompsons drs!!

4th

[na300zx (OH)]

I'd strongly consider DRs

[90NA300ZX]

WOW that's a quick 5 people for DR's....now i just hope we all actually vote for them when the poll comes up because i know for a fact that i won't be hooking up and making use of my power with anything less than DR's

[Twindragon]

People need to start voting for the HICAS delete + 3" test pipes!

[cheezmonta]

People need to start voting for the HICAS delete + 3" test pipes!

I forgot about test pipes! I'm going to need a set soon to go with my 3" dp's.

And I'd pickup an aluminum radiator.

[tommyyj]

120k kit with all the options
Jspec tails
4 bolt/5 bolt 3inch downpipes, preferably 4 bolt ;)

[kaosTTZ]

I'm in for 4 bolt 3" DPs with 3" -> 2.5" TPs and also possibly the drag radials

[gnozahs]

I suggest a free gift since my birthday is in May =]

[jigga jatt]

120k kit with all the options
Jspec tails


:)

[ForeverZ]

I'm with the molding and J-spec tail crowd :)


Edit: and by molding i mean the trim, like the things that are suppose to be black but look chrome now (windshield,t-top, windows... all of them)

[600zxr]

Stillen or WW front bumpers
1 pc. SS clutch line from master to slave cylinder
300degree camber kit
Nistune
5spd rebuild kit sounds good but most don't have the special tools to work on them.

[600zxr]

I suggest a free gift since my birthday is in May =]

I guess that goes for both of us my birthday is May 13.

[BlackTopZ]

Vote for JSpec tails and
Greddy Profec B SpecII EBC
:thumbsup2:

[ryzcar91TT]

3" downpipes + 3"-2.5" testpipes (4 bolt)
300degree DIN panel
wide band o2 sensor

[z0MG]

How about a chance for most of us to get rid of our restrictive POS stock intake system with some sort of new intake kit?

[plastercaster]

[QUOTE=ForeverZ;1667822]I'm with the molding and J-spec tail crowd :)


Same, looks like a good number of people want the jspecs.

[michaelsevilla]

mickey thompsons guys we have 5 ppl come on!!!

[90NA300ZX]

mickey thompsons guys we have 5 ppl come on!!!




They'll definitely make the poll...now i just hope enough people vote for them.




And i wonder if it'd be possible to get them already mounted on a pair of stock Z32 wheels? I'd like to have the ability of just swapping over the wheels and not worry about mounting tires every time i want to go to a track...plus, if we're all getting them on the same wheel, they'll all be the same size tire, meaning a mass purchase of the same size/style tire can be made, which i assume would make it easier/cheaper on the company we're buying through to get a discount.

[StraitUpFya]

13" brake upgrade
new moldings
300 degree din panel

[sadairk2]

MATTZ Garage 13" Wilwood brake kit (I want this so bad it hurts)
Kaminari/Karuma Z flush mount, or TBL
I might be down to MT DR's if the price is right. What sizes though? To fit on stockers?

[90NA300ZX]

I'd assume 255/45-16 tires...unless it's possible to fit 265's on the stock TT wheels...i dunno if it is or not. Plus, i have NA wheels so i dunno if that extra half inch width of the wheel would limit me or the other NA or NA-->TT converted guys

[DAN137]

99 left and right tails
120k timing

[michaelsevilla]

I'd assume 255/45-16 tires...unless it's possible to fit 265's on the stock TT wheels...i dunno if it is or not. Plus, i have NA wheels so i dunno if that extra half inch width of the wheel would limit me or the other NA or NA-->TT converted guys

Drs? Another vote?

[CGdrivenZX]

seems like the favorites are m/t DR's
moulding kits
3" dp & 3"-2.5" test pipes and
120kits with options are the biggest.

I'd be down for any combination of those, and would break the bank for 3 out of 4 :thumbsup2 :

[Z_wrecker]

AMS big brake kit :)
AMS pulleys

[TheOrteganator]

MATTZ Garage 13" Wilwood brake kit (I want this so bad it hurts)

I'm almost positive the MATTZ Garage kit is 12.2", that's how it is listed on their site and there's no way a 13" rotor is going to fit under a stock wheel like they advertise.

For the money... the Z1 13" BBK is a much better buy. And should be part of the voting! I need to do brakes either way, I'll roll with the 13" kit if we get a group buy.