March '09 Group Buys are now posted in the 3ZC Store

[N20Z]

Check out the 3ZC Store (http://www.3zc.com/store)and take advantage of the March Group Buys going on now.


http://www.300zxclub.com/store/imagemagic.php?img=images/z1300zxsubframespacersbla ck1resize1.JPG&w=150&h=150&page= (http://www.300zxclub.com/store/product_info.php?products _id=2773)
Subframe Bushing Collars (http://www.300zxclub.com/store/product_info.php?products _id=2773)
Regularly $58.00
GB Price $38.00


http://www.300zxclub.com/store/imagemagic.php?img=images/amsmaxflowmani451.jpg&w=166&h=150&page= (http://www.300zxclub.com/store/product_info.php?products _id=2955)
AMS Max Flow TT Exhaust Manifolds (http://www.300zxclub.com/store/product_info.php?products _id=2955)
Regularly $695.00
GB Price $495.00


http://www.300zxclub.com/store/imagemagic.php?img=images/z1gt675RSkitupdates091res ize2.jpg&w=165&h=150&page= (http://www.300zxclub.com/store/product_info.php?products _id=2768)
Z1 GT675RS Turbo Kit with new updates (http://www.300zxclub.com/store/product_info.php?products _id=2768)
Regularly $2845.00
GB Price $2398.00


http://www.300zxclub.com/store/imagemagic.php?img=images/z1premiumshorshifterz321r esize.jpg&w=168&h=150&page= (http://www.300zxclub.com/store/product_info.php?products _id=2712)
Z1 Premium Short Throw Shifter with new grease boots (http://www.300zxclub.com/store/product_info.php?products _id=2712)
Regularly $148.00
GB Price $98.00

[Bohemiangod]

buying the collars lol

[91300zxttkid]

HOLY 4 Group buys!!!! THANK YOU 3ZC!!! even though i need suspention.. hint hint lol
-George

[T3ku]

Bought the collars ;l

[doomday300]

nice, 4, ill buy Collars and short throw (even tho i have one already...) ha, thanks 3ZC

[tya]

I'll probably buy the collars....I didnt even know that the original 4 piece design h as been updated with 8 pieces now..

[cheezmonta]

Uggh.. I don't need the manifolds but they are sooooooo tempting. :lick:

[TnkrsToyCo]

Everyone please note, the Manifolds have been reduced again for the GB to $495

[bosskong]

I will most likely grab a set of these turbos, but I'm wondering if I should just wait. It will probably be a few months before I get around to installing them. And if I plan on doing it in a few months, the install will probably actually be a year or more away. I may buy these turbos now at the GB price and let them sit on the shelf for a while, but is there anything I should be thinking about? Think any of the parts will rust or dry up in that time?

[leno]

I doubt it, but I'd be more concerned with all the supporting mods you'll now have to do.

[evo@24psi]

How hard and time consuming are the Subframe Bushing Collars to put on? Im about to order a few things and trying to decide if their worth getting. My Bushings look ok.

[prell]

Subframe collars are really easy to install, maybe 1 hour or less for the average mechanic

1. Set the car on jack stands (rear points)
2. Place jack under rear subframe
3. Remove 4 subframe nuts
4. Lower jack an inch or less which lowers subframe from chassis
5. Insert 4 top collars
6. Insert four lower collars, place large washer and nut back on and tighten
7. Check FSM for Torque specs
8. Remove Jack and drop car back on ground
9. Drink some beer and pat yourself on the back

IMO ... just drop subframe and do the Hyperflex bushings instead, they are a pita but a much better option.

Also, number 9 is optional but I recommend it

Good Luck !!

[evo@24psi]

Thankx man. I just placed a order for a couple things.

[cmeasley]

does the short shifter come with new bushings?

[Cuis-Z]

does the short shifter come with new bushings?

No, it doesn't need them as it uses rollerbearings instead. I put mine in a week or so ago and I'm VERY pleased with it.

[Danny (d.k)]

so this goes on until the end of march?

[TnkrsToyCo]

Yes Cuis-z, is right they were changed a few months back to the roller-bearing.

Yes Danny end of March.

[N20Z]

1 day left for the March Group Buys!

[rockchucker]

Good thing I get home tomorrow night!

[son of sam]

just ordered the sub frame spacers and will be getting the manifolds in the morning, wish i had extra cash for the turbos, awesome deal