VOTE for the May '09 GROUP BUYS you want to see in the 3ZC STORE!

[N20Z]

There will be group buys on the products with the most votes in the 3ZC store next month. Please vote on a product only if you are seriously interested in purchasing at a great price.

The 3ZC store is committed to bringing our members incredible deals on the quality Z products they want. Polls are held here to determine what products members want group buys on. New group buys will start around the beginning of each month and usually run to the end of the month. When products are taken out of the “Group Buy” box on the front page of the 3ZC Store they will no longer be available at the special group buy price. This will usually happen around the end of the month, but some products may be removed earlier if our suppliers sell out.

Only members of 300ZXCLUB.COM are eligible to participate in the group buys in the 3ZC Store. Special group buy prices are only available in the 3ZC Store through online ordering. Products on the 3ZC Store are not available for order by phone. The 3ZC Store offers support by email only at store@3zc.com .

Please do not contact our distributors or the product manufactures regarding product pricing, orders, or status of orders on the 3zc.com store. Please send all product and order inquiries to store@3zc.com . The special prices and group buys listed here are only available through the 3ZC Store and not directly through our site sponsors or the product manufacturers.

Unless otherwise stated, group buy orders will be shipped from our distributors within (10) days after the group buy ends. Do not assume your order will ship sooner, unless we have stated otherwise Many of the products may ship sooner, even before the group buy ends. After completing an order, customers will receive an e-mail confirmation and a tracking # will be added to the order comments. However the tracking # will not become active until the product actually ships. Customers will receive another e-mail when the order ships.

Members can place orders on the 3ZC Store with confidence. We only deal with proven vendors and do our research before including products in the store. We feature products that suppliers have in stock or are readily available. In the event that there is a back-order or delay in shipping an item, you have the option of a full refund immediately. 300ZXCLUB.com stands behind your orders and guarantees your satisfaction!

[Z_wrecker]

go big brake kit

[Z_pilot]

C'mon Moldings! My car is in dire need of them.

[dirt114]

i want throttle bodies! but i NEED radiator... well i dont but had to vote for it haha hope they both get in!!

[doomday300]

Go Z1 Radiator, TBs, and 13" brake kit!!!!!

[michaelsevilla]

dang no mickey thompsons :( oh well...

[z_shotta]

Tough choices..... Grrrrrrr! 13" kit & TB are the only 2 worth getting to me..

I guess the Brakes make more sense now.. and TB some time later when nothing else left to upgrade.

[Jaxinc]

Tbs for me.

[bbsalexaz]

yay tension rods!

[na300zx (OH)]

Go tuberculosis!

[TvVisTofFaTe]

hey i bought my car with a cracked windshield/crappy molding

but...that hicas elimination looks sexy

[91300zxttkid]

GOO big brake kit pleaseeeee
-George

[TheOrteganator]

13" rotor kit... come on! I gotta do brakes soon anyway, might as well do it right.

[90NA300ZX]

dang no mickey thompsons :( oh well...


+1


We had several people state they'd be interested in them...more than some of the items that actually made the poll...why wouldn't we be able to get a deal on the drag radials?

[TnkrsToyCo]

Moulding Kit, everyone needs one.

[Tylerw1]

HICAS ELIMINATION!!!! Then upgraded TB's!

[EckoInLasVegas]

Whats the "new design" TB's? Whats the differences between the old and new ones?

Also, might be a good idea to LINK all these choices in the poll to the actual item to view OR to put them in the thread post!

[na300zx (OH)]

Instead of being cast, they are going to be machined out of a block of aluminum.

Whats the "new design" TB's? Whats the differences between the old and new ones?

Also, might be a good idea to LINK all these choices in the poll to the actual item to view OR to put them in the thread post!

[phantomz]

that trans sounds nice. but how much do you guys think we would get off of it since its an OEM. well Jap OEM Part. the BB kit sound nice hope theres an option to add on SS lines and pads. hint hint administrators

[dirt114]

Instead of being cast, they are going to be machined out of a block of aluminum.

to save weight or what? why is this better?

[na300zx (OH)]

to save weight or what? why is this better?

Probably for tighter tolerances since it will be CNC machined out of billet aluminum vs. casting which has variations. That is just my guess though.

[dirt114]

toerances for what? lol im a noob it seems

[czh5005]

Less distance between the flap and the side resulting in a better seal. Tighter tolerence = smaller gaps.

[russell@z1]

to save weight or what? why is this better?

Better tolerances, stronger material strength, smoother more attractive surface and internal bore. The walls of the internal bore are harder and more wear resistant to the butterfly inside. No more small casting pits in the exterior resulting in a smooth finish, and a much better looking chrome plated option.

[Twindragon]

What's the "new design" with the throttle bodies?

[dirt114]

oic... ok. HEY VOTE FOR RADIATORS!! i need this people!

[kevsz32]

transmission!!!!!!! i need one soon.....

[SuperHatch]

Will there be a Slicktop option for the moulding kit? If not, my vote goes for the trans.

[daxnizmo]

Moulding Kit, everyone needs one.

absolutely!

[TheDeadKing]

I need the moldings (we all need the moldings from the look of it). haha

[dogpile5]

voted for teh 13" brake kit. Would REALLY love it if there were slotted only rotor offerings...I've called Z1 and they said it can be done, but it is special order only and takes 3 weeks to come in. Also if it wins, could you add an option to do the rears also?

[1990ZDRIVR]

13" big brake kit.....but i also need those damn moldings....aaahhh!!!!lol

[tarollio]

Looks like the mouldings are a lock! but I really need AMS Tension rods too!

[TheDeadKing]

Looks like the mouldings are a lock! but I really need AMS Tension rods too!

You can already get a discount on the AMS tension rods through the store here on the forum.

[TnkrsToyCo]

^^True, just because it's not in a "Group Buy" right now doesn't mean we don't have a great discount on it in the store.

[z-owned]

We need more votes on the tension rods. I say save some money on the trim and paint it and wait for the door and quarter glass moulding to get put up on a gb

[Pornographers Car]

I kinda wanted to vote for the OEM windshield And t-top moulding kit. . .
However some of us like myself dont have t-tops but convertibles and/or slicktops. Is there a possibility that 3ZC can offer a choice or option for mouldings on the different models?

[SuperHatch]

Will there be a Slicktop option for the moulding kit? If not, my vote goes for the trans.

Again

[czh5005]

Go TB's becasue they like the rest of the stuff on my NA thus far can be put on a TT motor in the future.

[leno]

Come on radiator!

[doomday300]

Come on radiator!
2nd, I NEED!!

[zunit32]

I definately need to cop me up some of those upgraded TB's!

[SMZTallGuy]

Will there be a Slicktop option for the moulding kit? If not, my vote goes for the trans.

Would be nice.. I need it

[halon]

oh sweet jesus please window moulding kit. No more soggy-bottom on rainy days.

[Zfanatik]

I need the moldings (we all need the moldings from the look of it). haha

no i need brakes!

Z1 rotors that is.. I'm not that one vote for the master cylinder brace lol.. as much as i'd like to save myself fiddy cents on it.

[na300zx (OH)]

Would be nice.. I need it

If you think TBL strips are easy to break in shipping, you need to see new slicktop mouldings. You are so much better off going to the dealer. They are long and flimsy, and would take super hella packing and a big box. You have to be careful just carrying them...

[ZHundred3X]

voted for teh 13" brake kit. Would REALLY love it if there were slotted only rotor offerings...I've called Z1 and they said it can be done, but it is special order only and takes 3 weeks to come in. Also if it wins, could you add an option to do the rears also?


I'm with Justin, I would like them to add an option for the rears as well. I voted for the T-Top trim but would like the Brake Kit to win as well.

[Z32C]

I just bought the molding and associated parts that go around the windshield in anticipation of replacing the windshield, so a windshield would be a great thing. But then I have a '93 'Vert.
Will

[Z_wrecker]

no i need brakes!

Z1 rotors that is.. I'm not that one vote for the master cylinder brace lol.. as much as i'd like to save myself fiddy cents on it.

isn't master cylinder brace an option for a Z1 kit?

[91300zxttkid]

13 Inch brake kit!!!!!
-George

[LIVEtheTTlife]

Ahh, the only thing I need on that list is the master cylinder brace, since I don't have T-Tops, or a T-T, and I already have T-Rods. Definatlely not buying T-Bs for my non-T, my T-guage tells me my radiator is T-riffic, and I'm gonna try to get my T-ransmission (<--ok that one was stupid) to last until I get my vg30de-TT. So yeah, you guys should do the brace for sure :)

[JDMnc300]

Moldings, TB, Big Brakes

[Twindragon]

When the molding kit is offered can we have the option to purchase just the windshield or just the t top moldings? I just need t top moldings.

[d_flore]

come on trans only a few days

[Twindragon]

Still curious as to how the new design of the tb's differs from a previous design.

[JK]

TB cant wait to get them! Going to need them coming up:burnout:

Better tolerances, stronger material strength, smoother more attractive surface and internal bore. The walls of the internal bore are harder and more wear resistant to the butterfly inside. No more small casting pits in the exterior resulting in a smooth finish, and a much better looking chrome plated option.

Still curious as to how the new design of the tb's differs from a previous design.

[Twindragon]

TB cant wait to get them! Going to need them coming up:burnout:

Great now I hope I don't have any issues with my old versions!