November 09 3ZC GB choices discussion and suggestion thread

[N20Z]

Suggest and discuss possible November 09 3ZC GB choices in this thread.

Please remember if we have held a Group Buy on an item with-in the past year, we won't likely feature the same item again for at least a while. Many of the suggestions we saw in this thread last month were for items that have already been offered. Buy them while they are on special because it will be a while before you get another chance to.

[Trbo]

Injectors would be a life saver for me. I bet alot of members need a set too.

[tt300zxFREAK]

Injectors would be a life saver for me. I bet alot of members need a set too.

You sir are correct!! I'm in need a set of PE 850s with a 300 degree fuel rail!!

[EvilGSXR]

Performance Brake Upgrade Package

[alaNi]

Brake upgrade or Suspension package

[BlackRC3]

Performance Brake Upgrade Package

x2 maybe the 370z package :)

[dirt114]

-2.5" SMIC piping
-deatchwerks injectors
-stock CHRAs
-Z1 silicone oil cooler lines (long ones)
-synapse BOVs with recirc option
-rings and bearings (rebuild kit without pistions)
-TT oil pan
-autometer boost gauge

[Trbo]

I doubt they'd do the brake package, seeing as that was an option like 2 GB's ago.


Now NA/TT injectors on the other hand :D

[Kyle350]

BDE Performance VTC Gears.

[leno]

Coilovers.

[zil32]

1. BDE Z32/VG30 Motor Mounts
2. AMS Underdrive Pulley Set
3. PE 850s with a 300 degree fuel rail

[bbsalexaz]

N/A test pipes 2.5". Not that cheapo Chinese shit.

[SinCityZX]

AMS/Z1-Howe Twin Turbo Radiator Upgrade
Z1 TT Oil Cooler Upgrade
Z1 Chrome lower radiator hardpipe w/ silicone elbows
AMS Underdrive Pulley Set

[stricer555]

Carbing front and rear strut tower bars.

[sadairk2]

Arg! I HAVE all that stuff. I need exterior now. How about a CF hatch with DOT approved safety glass? :D

But seriously, how about a KarumaZ or Kaminari flushmount with side skirt package. I really have to redo my moldings, too.

[23BIGA]

Tein SS Coilover Set
or
EFI Harness (RHD '90-'93 TT Auto)

[DualZ32]

silicone idle/booster hoses
kam sideskirts

[vinnyme453]

Catback from Labree or Specialty Z.

[undercoverdjay]

Newer style Injectors would be nice
AMS/Howe Radiator

[jschrauwen]

-2.5" SMIC piping2nd that Keith.



2.5" SMIC Piping Kit - (I'm sure the 3ZC Store has a deep enough vendor resources to come up with something more affordable than the outrageous $1k asked by the current vendors.)

LED Replacement Kits - (Combination LED replacement bulb kits for tail/reverse/brake lights, side markers, licence plate, turn signals, Instrumentation Cluster/Pods, Dome/Map/Hatch/Foot, with adequate load characteristics (to prevent black box triggering of warning light) and with digital flasher/relay.)

Pop Filter Shield - (Something a little more durable and esthetically pleasing than a painted plastic flower pot. And/or something similar to those nylon type of filter sleeves that's semi water resistant and made to fit the pop charger filters.)

[fred's300zx]

how about some eagle rods and wiseco pistons

[Kyle350]

+1 AMS Underdrive Pulley Set.

[gnozahs]

Front and rear strut bars =]

[ed cottrell]

4 bolt 3 inch expansion pipes

[T3ku]

Injector/Fuel Rail combo would be nice.

At least next step up over stock.

This forum requires that you wait 20 seconds between posts. Please try again in 5 seconds.
o_O

[dirtdog]

coilovers !!

[d_flore]

LED Replacement Kits - (Combination LED replacement bulb kits for tail/reverse/brake lights, side markers, licence plate, turn signals, Instrumentation Cluster/Pods, Dome/Map/Hatch/Foot, with adequate load characteristics (to prevent black box triggering of warning light) and with digital flasher/relay.)

2nd This!! Great idea

[Roundabout136]

-Third Brake Light
-Some sort of suspension package

[sadairk2]

John, great suggestion. I hate getting the damn idiot lights with LED's when I hit the brakes or LED turn signal light that do not cycle correctly.

[soyboricua3zx]

Front and rear strut bars =]

Sounds good =)

[threehundredzx]

third brake light
coilover

[blacktwin]

a wideband wouldn't hurt AEM or innovate
or maybe a sale on KYB AGX shocks.
prolly doesn't havea snowball's chance in hell but its something different and i know i need them.

[dogpile5]

I'd like to see some sort of decently priced oem style steering wheel wrap offered, or maybe just group buy pricing through one of the companies that do a good job on these things. The price for a new wheel is ridiculous, and the overlays just don't feel right. From the time I've spent searching, these two companies have come up several times:

Dallassteeringwheel.com
or
importsextreme.com

[TheDeadKing]

Third Brake Light!

[Barry(TN)]

Z1 intercoolers :)

[zakakhan300zx]

a wideband wouldn't hurt AEM or innovate
or maybe a sale on KYB AGX shocks.
prolly doesn't havea snowball's chance in hell but its something different and i know i need them.

I could go for an aem wideband as well.

[Fuergrissa]

4 bolt 3 inch expansion pipes
2nd, but I don't know how many are available. SZ charges a retarded premium over the 5-bolt variety because they were low production, dont know if they are even still availalble. this is the one thing I would appreciate ams knocking off.

Need 740/300D injectors/rails also but I wouldn't mind seeing them closer to christmas =)

2.5in IC piping would be nice but it would still be too expensive even at 20% off. same thing with 2.5in IC's the cores for massives/Coz cost around 500$ and after they make up endtanks they retail for double.

[BLACKBEAST]

Carbing Front Strut Brace

[TuftsAuto]

a wideband wouldn't hurt AEM or innovate
or maybe a sale on KYB AGX shocks.
prolly doesn't havea snowball's chance in hell but its something different and i know i need them.

I second the KYB AGX shocks.

Also,
-Strut bars
-shock/strut rebuild kit(gaskets and bushings, etc)

[pady999]

555 injectors with 300 deg. rails.
ams lightweight pulleys
labree catback exhaust

[phantomz]

+5 strut bars (carbing)
-stillen sway bars would be good too

[300z_kid]

the 2.5" ic piping would be nice, but probably still to expensive as someone else said.

555 or 740cc injectors would be clutch though. or a doolz id be a fan of.

[Anskiere]

pe 850s, ztuner ecu, 2+0 3" -> 2.5" testpipes

[Twindragon]

Sway bars wouldn't be a bad idea. + Endlinks.

[sailorjason]

700BB kit would be choice.

If thats not an option I would def. buy 740ccs + 300 rail, or a doolz intake. Still cant buy that AMS mani. Hope that isnt an issue for this GB.

[xz003nassin89]

1.TBL
2.Coilovers
3.555 injectors
4.New seats or seat covers.
5.carbing strut bars

[JON_90zx]

1. Third Brake Light
2. Exterior molding kit
3. Coilovers
4. Seat covers or interior make-over kit
5. Testpipes (NA or TT) with an option for High-Flow Catalytic Converters

[Perrysan greyZ32NA]

Injector upgrade with 300 degree rails as mentioned above. I should have the money by then.

[omegaboost]

turbos!!!!!!!!! something like 675 and over. Mine are dead!!!!!

[rabbiz(Philly)]

brake upgrade package and specialtyz exhaust

[Sleek]

3" Testpipes and Cat-Backs
TDM 2.5" Intercooler Piping and 4.5" core FMIC
Foglight Ducts

[omegaboost]

^TDM 2.5" Intercooler Piping and 4.5" core FMIC??? Z1 sells that now???

[SquallLH]

Performance Brake Upgrade 13"

[Sleek]

^TDM 2.5" Intercooler Piping and 4.5" core FMIC??? Z1 sells that now???

I don't think so. I didn't know it had to be something that Z1 sold.

[flipsk8ter94]

how about something that hasn't been selected before like :
-- in-dash gauge pod cluster
-- some sort of piggy-back (nistune, zemulator ...)

also:
--carbing strut tower brace
--z1 13'' brake kit , possibly with a braided line option?
--z1 upgraged trottle bodies (they have a huge discount the sept 26th for z-nationals but not all of us can make it)
-- new leather shift and e-brake boot

[Ace2495]

third brake light
coilovers and needed mods to asset it
led light kit
molding kit

[Trbo]

V-Tec solenoid




Seriously though, injectors! I bet half the forum needs a new set

[nickyR]

manifolds.

[canyoncarver]

I would consider getting in on some nicely priced coilovers.

[Twindragon]

2nd^

[son of sam]

pe850s

[90NA300ZX]

I'VE BEEN SUGGESTING THIS FOR MONTHS, SO I'LL TRY AGAIN...


DRAG RADIALS!!!!!!!!!!!!!!!!!! !!!!!!!



What good is all the power we can MAKE if we can't get it to STICK!?!?!?

[zxtuner161]

aem ems

[LuckyZ]

1. TBL
2. Carbing Strut Bar

[michaelsevilla]

Drag radials ladies come on.
Also the z1 sport 800s let's get these bad boys cheaper for me hehe!
I really dunno what else .. Perhaps the escort doors and trunk?

[NismoTuner21]

Deatschwerks P1>P2 adaption kit ASAP! PLEAAAAASEEEE

[N20Z]

Go ahead and post up some November 09 Group Buy suggestions in this thread.

[czh5005]

AMS Pulleys
AMS Rad + Z1 NA->TT conversion bracket
TBL

[Roundabout136]

Third Brake Light!

[offset_98]

Third Brake Light!

Ooh yeah!

[ominous]

AMS Underdrive Pulley Set!

[jschrauwen]

2.5" Turbo/IC Piping

[vinnyme453]

I Still vote Labree or Specialty Z catback. I'm sure a bunch of people would jump on that.

[jschrauwen]

^^ None are site sponsors.

[TwinTurbo_Z]

i bet sz wouldn't mind being site sponsors.. someone just needs to ask them

[BBUG]

entry level coilovers
moulding kit
jspec rear light kit

[IsThatJJ]

AMS pullies, suspension, suspension, suspension.

[dirt114]

-2.5" SMIC piping
-deatchwerks injectors
-Z1 silicone oil cooler lines (long ones)
-synapse BOVs with recirc option
-rings and bearings (rebuild kit without pistions)
-autometer boost gauge
-engine rebuild gasket set

[canyoncarver]

Work some deals with CPark on his coilovers and other suspension parts.

[stricer555]

+2 for the third brake light (NA)

[Matt007az]

JDM Tail Lights!!!!! pa pa pa pleaseeeee OR Jspec Front bumper

[d_flore]

Coilovers,
Camber stuff

[d_flore]

I know this isnt exactly the right thread but I dont know of a better place to put it...

I used the contact button on the store web page many days ago and have no gotten a reply. What is the best way to contact the store?

[TnkrsToyCo]

Pm either lifeisboost or N20Z.

[Sousuke]

Coilovers

[itZj0k3r]

Labree/Specialty Z Exhaust

*Coilovers*

and any other suspension parts

AMS Lightweight Pullies

[soyboricua3zx]

Mickey Thompson's come on!!!!!!! Also, lets get the carbing strut and tower bars on there.

[Anskiere]

new style engine EFI harness

[Perrysan greyZ32NA]

Injector/ fuel rail package or coilovers for sure.

[90NA300ZX]

Once again, i'll suggest Drag Radials...and once again, i'm probably going to get a lot of member support...and once again, despite getting support, the idea will most likely not make the voting poll.....and, once again....i'll probably not get any explanation as to why not.

[daxnizmo]

'99 J-spec fascia/tails

[JoBamBo]

smoked corners for Aspec bumpers.

[Sleek]

3" Cat-Back
Nose Panels
Solid Differential Bushings

[rabbiz(Philly)]

wideband
specialtyZ exhaust
brake package

[Kruse]

Turbo's (Sport 700's)
Injectors + 300Degree rail
Rebuild kit
Innovate wideband

In that order.

[deebz]

But seriously, how about a KarumaZ or Kaminari flushmount with side skirt package. I really have to redo my moldings, too.

+1.... and 3" midpipes

[Ace2495]

A full adjustable suspension package deal. that would be awesome!

[deebz]

Yeah I need midpipes, or anything adjustable suspension related, and tires

[d_flore]

Pm either lifeisboost or N20Z.

I did this as well a few days ago and still no reply...

Now I have emailed and p'md both of these members? Anyone know what is going on?

[toykoz32]

2.5" SMIC piping

[Fuergrissa]

Mattz Garage top-feed fuel injector kit - worth a shot

Or the Selin MAF translator and dual maf elbow kit

[gnozahs]

Injectors!!!

[supergoji]

Selin dual maf translator
Injectors 850's

those would sell big i believe.

i need those both too haha.

[sak01]

ALLOY TOYZ (AMS) 3" Downpipe & 3" - 2.5" Testpipe combo
Z1 675 turbo

[Delox]

no vote yet? Guess I'll add to the popular suggestion of suspension adjustable components

[RarisRX-7]

no vote yet? Guess I'll add to the popular suggestion of suspension adjustable components

another bump for adj. suspension kit :waveby:

[Farm_Z32]

engine rebuild minus the connecting rods, pistons. that would be saweeeet

[AllHailZ]

Powertrix coilovers!!!

[Perrysan greyZ32NA]

Yep adjustable suspension components! Tons can benefit from that.

[soundahfekz]

PCV hose/valve kit
J-spec tails
60/120k timing kit

[Black91TTZ]

Coilovers and powertrix suspension kit

[swatsav]

Alloy Toys Resonated 3" to 2.5" testpipes

[z-owned]

60/120k timing kit

They have had this up on GB for over a month now....

[SquallLH]

Z1 Intercooler or 13" brake upgrade. :gtfo:

[Fairlady_z]

How about some.. side skirts??

[omegaboost]

im down for powertrix coilovers or 675rs kit or maybe even 800r kit

[SinCityZX]

suspension adjustable components

[d_flore]

60/120k timing kit

:chair:

[timeless]

Definitely a set of silicone PCV hoses for the TT.

[TnkrsToyCo]

^^ Good idea Albert, only how bout a complete silicon hose kit for the TT or the NA.

[Kruse]

^^ Good idea Albert, only how bout a complete silicon hose kit for the TT or the NA.

!

That would be great, full slicone hose kit for TT engine etc, id buy it instantly.

[Jamgo]

Lightweight pulley set.
So since this is the november discussion, whens the voting start? is it gonna be for december then?

[dogpile5]

!

That would be great, full slicone hose kit for TT engine etc, id buy it instantly.

Make this happen!

[DoodMon]

-clutch and or flywheel
-brakes
-engine mounts
-suspension bushing kit would be awesome
-pulley kit

That about all i need

[TnkrsToyCo]

Make this happen!

Checking to see if we can make it happen. I'd like to have several sets myself.

[Danny (d.k)]

I think brakes and the rfl bov's should be up!

[timeless]

^^ Good idea Albert, only how bout a complete silicon hose kit for the TT or the NA.

Yeah, that sounds good. I just figured they could only do one type at a time but if both are available, great. I would buy both sets.

[DualZ32]

id take a set in black

[TnkrsToyCo]

I need at least 3 na sets and 1 tt set.

[stricer555]

1 na 1 tt for me please

[jschrauwen]

So since this is the november discussion, when's the voting start? is it gonna be for december then?I just popped in to find out the same.

[Spawn]

Greddy Profec II Boost Controler

[Mister Z]

I just popped in to find out the same.

Wondering the same too