Z32Family

what it do do boo boo?

http://www.300zxclub.com/showthread.php?t=189444

Pure Z's!! If I can get a couple Z's from our area I'd be so down for this... LMK what you think about it.

dude i replaced the oil pressure sending unit now my guage shows normal readings!!! BTW Wêk'fest this weekend!!!!!!!!!!!!

I highly doubt I'm leaking oil, but ill pull it off and check, but yea the sensor ima replace its old either way...so is your car gonna be ready for wek'fest?

WHAT!!!! TT!!!!! haahahah nice man! But as far as my OP, nah it moves with the engine speed, but once its fully warmed up it drops to like 1 or 2 psi. I still have pressure, I chechked it with an external guage, so I'm just going to order that engine flush stuff from Z1 and another sending unit.

whats up with the Z man?! i heard Jamell got his running...guess what now mine is having low oil pressure issues

On that Oil Change, some with higher mileage cars, especially in warmer climates even go with a 15W40 or 15W50. Although in your case the low-end readings seem fine (which they wouldn't if your Sender was clogged). These cars are known to have a somewhat erratic guage (as you can see from Manual PIC). Normally after Oil warms it tends to thin causing lower Oil pressure ...in your case it "seems" opposite. If your car has ever had a sludge build-up in the Pan (possibly due to blown head gasket mixing oil/water it's possible that you've got an Oil pick-up partially clogged and restricts Oil Flow/Pressure until it's thinner. Does your Guage-needle move normally with RPM or does it tend to hang-up at tops occassionally? Thanks on the Spoiler ...came with the car, I believe it's the lower profile Wings West.